Non standard T-shaped screw processing

Speaking of T-nuts, I believe everyone is familiar with them. As fasteners around us, T-nuts are commonly found in their daily lives, such as in the construction industry, electronics industry, machinery industry, digital industry, etc. However, there are always operational difficulties when processing non-standard T-screws. Today, we will talk about what issues should be paid attention to when processing T-nuts.

Nowadays, many regions use some T-nuts during construction, which are particularly helpful for many areas. Moreover, nuts are widely used nowadays, but there are also many difficulties in processing T-nuts. When processing T-nuts, attention should be paid to:

After tempering treatment, the color of the T-nut may change; After soaking non-standard nuts in ether for a period of time, if sticky substances are found, it indicates that the non-standard nuts have not been cleaned thoroughly; After inspection, it will be found that the accumulation of non-standard nuts is not good enough when heated, and non-standard nuts may undergo slight oxidation reactions in quenching oil;

When quenching T-shaped nuts, clean the impurities attached to the surface with silicate cleaner, and then carefully soak to avoid residual impurities on non-standard nuts, which may affect the effectiveness of non-standard embedded nut processing;

When pickling T-shaped nuts, the acid concentration of the nuts should be controlled, otherwise the pickling effect will not be significant.